Removing paint, stickers and residue after construction in Greer

The painters are gone, the floors are in, and then the light hits the windows and every drop of paint shows up. Post construction window cleaning in Greer starts with that moment. New windows come with stickers, trim work leaves specks, and tape can pull adhesive onto glass and frames. None of it is hard, but it is slow, and the wrong shortcut can leave scratches that stay.

This post covers residue only: what it is, how it comes off, and when to leave it for a team. For general dust, see our post on the three phases of post-construction cleaning in Spartanburg.

Know what you are removing first

Residue falls into four groups, and each one needs a different approach.

• Paint specks: small dots on glass, tile, hardware and fixtures, usually from cutting in around trim.
• Manufacturer stickers: labels on new windows, appliances and fixtures.
• Adhesive: the sticky film left behind by stickers, painter's tape and protective film.
• Dried drywall compound and caulk: white smears on frames, sills and tile edges.

Fresh residue comes off easily. The longer it sits, and the more heat it gets from a sunny window, the harder it holds on. That is the first reason to schedule the cleaning soon after the work ends.

Step by step: glass first, frames second

1. Wipe off loose dust with a dry microfiber cloth, so you are not grinding grit into the glass.
2. Wet the glass and lift paint specks with a fresh, sharp razor scraper held flat. Dry scraping is where most scratches happen.
3. Peel stickers slowly, then soften leftover adhesive with a safe adhesive remover and wipe it away. Let it sit before wiping.
4. Clean the window tracks and sills with a vacuum first, then a damp cloth. Tracks hold more dust than any other part of the window.
5. Finish the glass with a clean cloth so no streaks are left.

Always test an adhesive remover on a small hidden spot before using it on trim, frames or fixtures. New finishes can react differently from old ones, and a mark on a faucet is much harder to fix than a speck of paint.

Timing helps. Painter's tape that stays on for days bakes its adhesive into the surface, especially on a window that gets afternoon sun, so peel it as soon as the paint is dry to the touch. Stickers on new windows are the same. A label left on through a few warm Upstate days will take a lot more effort to remove than one peeled in the first week.

Bathrooms and fixtures need a gentler hand

A new double vanity or shower enclosure is the last place to use a razor. Chrome, brushed finishes and coated glass can be marked by harsh products or rough scrubbing. The usual approach is a soft cloth, a mild cleaner and a wooden or plastic scraper for stubborn spots. Grout and tile edges often hold a film of drywall compound or leftover thinset, so they get checked too. If you want to avoid strong scents in a house with kids or pets, ask about green cleaning at the estimate.

How much does post-construction cleaning cost in Greer?

For a job like this, the factors are windows and glass, project size, dust level, phases and deadline. A house with a few small specks is a different job from one where every window has a label and tape marks. The count of windows and the amount of residue count here, since residue is slow, careful work. That is why we price only after a free in-home estimate, and why we never quote by photo.

To book the visit, use the form on post-construction cleaning in Greer, call (864) 399-5168 or text (864) 666-8520. The estimate is free and carries no commitment.

The same rule applies to doors, light fixtures and cabinet hardware: check the small things last, with good light and a clean cloth. A glass shower door can look perfect from across the room and show every speck from two feet away. Our team walks the house with a flashlight for that reason, and the post-construction cleaning in Greer page explains the rest of the process.

When it is worth handing off

You can do this yourself if you have a handful of windows and an afternoon. It makes sense to hand it off when there is a lot of glass, when the surfaces are delicate, or when your timeline is tight. Greer's homes vary, from older houses near Downtown Greer and Trade Street to newer builds near GSP Airport, and a builder or contractor finishing several jobs may also want one crew to do every final clean. Our team handles that sort of final cleaning for builders too.

A touch-up pass is common after residue work, since light shows what you missed. We usually look at glass in daylight, from a few angles, before calling it done. If you are comparing towns, post-construction cleaning in Taylors covers the same service close by, and our post-construction cleaning service page lists what is included. We also offer deep cleaning once the glass and residue are handled, if the rest of the house needs attention.

Ready to see it done properly? Book your free estimate for post construction window cleaning in Greer, or use the estimate form on our home page. If your closing or inspection date is close, say so when you book.

More answers in our house cleaning FAQ: post-construction cleaning →