Key takeaways
- Drywall and sanding dust spreads everywhere, so start high and work down.
- Damp wiping and a HEPA vacuum beat dry dusting.
- Pricing depends on the scope of the remodel, square footage and dust level.
The cabinets are in, the paint is dry, the contractor has left and your kitchen finally looks like the pictures. Then the sunlight hits at an angle, and you see it: a film of white dust on everything. If you are dealing with post-renovation cleaning in Greer, SC, this guide explains why remodel dust is so stubborn and how to remove it properly.
Greer's older neighborhoods off SC-14 and US-29 and its newer homes near I-85 and SC-101 (ZIPs 29650, 29651 and 29652) see plenty of kitchen, bathroom and flooring projects. Even a small remodel can spread dust through the entire house, because air moves from the work zone to every room.
Why remodel dust is different
Drywall dust is extremely fine and clings to surfaces. Sanding dust from wood or floors is gritty. Tile and cutting dust can be abrasive. If you wipe any of it dry, you can scratch glass, stainless steel and new finishes. And because the dust is airborne for hours after the work, it settles on top of anything you have already cleaned.
A step-by-step plan
- Wait for the air to settle. Give the dust several hours to fall before you start.
- Protect and ventilate. Open windows if the weather allows and keep the HVAC off while you remove the first layer.
- Start high. Wipe ceiling fans, light fixtures, vents and the tops of cabinets and door frames with damp microfiber.
- Clean the walls and trim. Use a lightly damp cloth on painted surfaces, testing a small spot first.
- Do the surfaces. Wipe counters, appliances and windows. Rinse cloths often.
- Vacuum with a HEPA filter. Use the brush and crevice tools on floors, edges and upholstery.
- Mop last. Change the water as soon as it looks gray.
- Replace the HVAC filter. Then run the system and re-wipe horizontal surfaces after a day.
Where dust hides
- Inside kitchen drawers and cabinets that were open during the work
- Tops of doors, ledges and picture frames
- Window tracks and blinds
- HVAC vents, returns and ceiling fans
- Sofa cushions, curtains and rugs near the work area
- Rooms the crew "didn't touch" but that shared air with the work zone
How much does post-renovation cleaning cost in Greer?
Pricing depends on the project. The main factors are the size of the space affected, whether the dust is limited to one room or spread through the house, how many levels and bathrooms need attention, what finishes were installed and whether you want windows and tracks included. A bathroom refresh is a smaller job than a whole-house flooring replacement. text (864) 666-8520 or use the Greer post-construction cleaning form Book a free in-home estimate: we visit, see the space and give you an exact price, with no commitment.
How long does it take?
A single-room remodel may take a few hours, while a whole-house cleanup can take most of a day for a team. Many homeowners split the work: the team handles the heavy first pass, and a lighter follow-up a day later catches what settled.
| Project | Typical dust spread |
|---|---|
| Kitchen remodel | Kitchen, nearby rooms, vents |
| Flooring sanding or install | Whole level, often the whole house |
| Bathroom update | Bathroom, hallway, adjacent bedrooms |
| Painting and drywall | Near rooms, all vents |
When to call a team
If the project was large, the dust is everywhere, or you are preparing for move-in or guests, a team is faster and more thorough. Perfect Services follows a Brazilian detail-first method: top to bottom, room by room, with close attention to tracks, edges and fixtures. Learn more about our post-construction cleaning service, or read the three phases of post-construction cleaning for a framework. Nearby, homeowners in Taylors can see post-construction cleaning in Taylors. If the rest of the house needs a refresh after weeks of work, add a deep cleaning.
Protecting your health while you clean
Remodel dust is not something to breathe in for hours. If you clean it yourself, wear a snug dust mask rated for fine particles, eye protection and gloves. Keep children and pets out of the area until the work is done, and avoid blowing dust with a leaf blower or compressed air indoors. If the home is older and the project disturbed old paint or insulation, ask your contractor how it was handled before you start sweeping.
Open the windows during cleaning when the weather allows, and wash or replace the filter on any vacuum that is not designed for fine dust, since a standard filter can release much of what it picks up straight back into the air. The tools matter as much as the effort.
Book your cleanup this week
Do not live with dust for weeks. Book a free in-home estimate on the Greer page or the home page estimate form, and we will find the soonest open day.
Finally, keep your expectations realistic: even a thorough cleanup may leave a little fine dust that surfaces over the first week as air circulates. A quick damp wipe of window sills and the tops of furniture a few days later is normal and usually all it takes. With a plan, the right tools and some patience, your newly remodeled space can feel the way it looked in the design photos.
Get a free estimate in Greer, SC
Brazilian-style cleaning from a local Greer team. We visit, see the space and give you an exact price, with no commitment.
Frequently asked questions
How do I clean construction dust after a remodel?
Wait for the dust to settle, then work top to bottom with damp microfiber and a HEPA vacuum, and replace your HVAC filter.
How much does post-renovation cleaning cost in Greer?
It depends on the scope, square footage and amount of dust. We give you an exact price after a free in-home estimate, with no commitment.
Why does dust keep coming back after I clean?
Fine dust stays airborne and settles later, and it can sit in vents. A second light wipe a day or two later helps.
More answers in our house cleaning FAQ: post-construction cleaning →
